These are High Volume Nitrogen Reservoir End Capƒ?› from Schmidty Racing Suspensionsƒ?› to replace the OEM needle-style fill endcaps found on Fox UTV and ATV shocks as on Polaris, Honda, Yamaha, Can-Am, Kawasaki, Arctic Cat, and John Deere models. These are designed to replace the OEM needle rubber nitrogen fill port style endcaps that are found on Fox UTV shocks, which are prone to leaking nitrogen and rendering the shock useless. The rubber pellet system is also semi-difficult to fill and unreliable. Our Schmidty Racing Suspensionsƒ?› replacement caps have an actual schrader valve installed in them which are recessed into a pocket to protect them from trail damage. This protective feature also allows the shocks to be serviced and recharged using a standard no-loss chuck!

These reservoir caps are made from billet 6061 billet aluminum and have been black anodized then engraved with our SRS logo. On our newly redesigned caps, we have added cooling fins to the exterior of the caps, as well as increased capacity internally to maximize capacity. These endcaps have an o-ring based "schrader valve cap" which threads onto the schrader valve and seals it into the recessed pocket. This fully protects it from dirt, debris, mud, or sand! Our SRS replacement endcaps also come with a new o-ring for re-installing the replacement endcap back into the shock reservoir, as well as a set of instructions on how to install them.

Note: There are different Generation caps (GEN 1 and GEN 2) and different sizes for the GEN 2. Please be sure to read the description below as well as directions on how to measure your reservoir to make sure you get the correct size and generation cap. GEN 1 reservoir endcaps are only available in 2.0". GEN 2 reservoir endcaps are available in either 2.0" or 2.5".

To determine whether you have 2.0" or 2.5" reservoir endcap size, you simply measure the outer diameter (OD) of the reservoir. On all of the variations, look at the pictures in the description, which shows the OEM caps up in front of the new SRS ones which will replace it. Original / old style caps shown only for reference.

Base Price is for a Single End Cap.

Buy as a Pair and Save!

Options:

GEN 1 - Fox 2.0": Podium Series

UTV/ATV shocks with a straight reservoir bore {no-step in the reservoir bore}

For GEN 1 endcaps, your OEM reservoir end cap will have a removable allen head cap screw with a "pin hole" in the center. That has a white plastic BB pressed into it.

If your OEM cap looks like the picture below and the OD of your reservoir is at 2.120", then you have a GEN 1 - 2.0" endcap.

GEN 2 - Fox 2.0": Performance Series

UTV/ATV shocks will have a "stepped" internal reservoir bore and the reservoir endcap will have a "finned" lip on the end of the cap.

There will be not be any removable allen head screw. There will only be small hole in the center of the endcap, with a recessed rubber plug in the center.

If your OEM cap looks like the picture below and the OD of your reservoir is at 2.120", then you have a GEN 2 - 2.0" endcap.

GEN 2 - Fox 2.5": Performance Series

UTV/ATV shocks will have a "stepped" internal reservoir bore and the reservoir endcap will have a "finned" lip on the end of the cap.

There will be not be any removable allen head screw. There will only be small hole in the center of the endcap, with a recessed rubber plug in the center.

If your OEM cap looks like the picture below and the OD of your reservoir is at 2.60", then you have a GEN 2 - 2.5" endcap.