Yamaha RMAX Shock Rebuild Bundle

This shock rebuild bundle from Schmidty Racing Suspensions includes all the parts needed to rebuild all (4) shocks for Yamaha RMAX Models.

These models do not have Billet Internal Floating Pistons with bleed screws from the factory. We highly recommend replacing them to allow completely removing the air from the shock at rebuild. You will need the 2.0" kits front and rear on all RMAX models.

Yamaha RMAX Seat Shock Rebuild Bundle:

• (2) Fox 2.0" x 5/8" Shaft Seal Kit Pair
• (1) Gallons of Lucas Synthetic Shock Oil in 7.5wt
• (4) 2.0" Gen 2 High Volume Nitrogen End Caps
• (1) Shaft Seal Bullet (Fox Shock 5/8" x .498" shank)

Optional:
• (1) Uniweld 400 PSI Nitrogen Regulator Shock Fill Kit: 8ft. rubber hose, 400 PSI glycerin filled secondary gauge, bleed off valve, and whip (link)