Models / Sizes: Kawasaki KRX 1000 Non-Live & Live Valve Models with 2.5" Fox Shocks Front & Rear
This shock rebuild bundle from Schmidty Racing Suspensions includes all the parts needed to rebuild all (4) shocks for Kawasaki KRX1000 Non-Live Valve Models.
These models do not have Billet Internal Floating Pistons with bleed screws from the factory. We highly recommend replacing them to allow completely removing the air from the shock at rebuild. For both KRX models you will the Fox 2.5" IFP kits front and rear.
Kawasaki KRX 1000 Non-Live Valve Shock Rebuild Bundle:
- (2) Fox 2.5" x 7/8" Shaft Seal Kit Pair
- (1.5) Gallons of Lucas Synthetic Shock Oil in 7.5wt
- (4) 2.5" Dark/ Hard Piston Wear Bands
- (4) 2.5" Gen 2 High Volume Nitrogen End Caps
- (1) Shaft Seal Bullet (Fox Shock 7/8" x .498" shank)
Kawasaki KRX 1000 Live Valve IBP Shock Rebuild Bundle:
- (2) Fox 2.5" x 7/8" Live Valve Shaft Seal Kit Pair
- (1.5) Gallons of Lucas Synthetic Shock Oil in 7.5wt
- (4) 2.5" Dark/ Hard Piston Wear Bands
- (4) 2.5" Gen 2 High Volume Nitrogen End Caps
- (1) Shaft Seal Bullet (Fox Shock 7/8" x .498" shank)
Optional:- (1) Uniweld 400 PSI Nitrogen Regulator Shock Fill Kit: 8ft. rubber hose, 400 PSI glycerin filled secondary gauge, bleed off valve, and whip (link) & one (1) Walker Evans IFP Pull-Out Tool
- (1) Uniweld 400 PSI Nitrogen Regulator Shock Fill Kit: 8ft. rubber hose, 400 PSI glycerin filled secondary gauge, bleed off valve, and whip (link)
