Honda Talon Shock Rebuild Bundle

This shock rebuild bundle from Schmidty Racing Suspensions includes all the parts needed to rebuild all (4) shocks for Honda Talon Models.

These models do not have Billet Internal Floating Pistons with bleed screws from the factory. We highly recommend replacing them to completely remove the air from the shock at rebuild assembly. Depending on the model or reservoir size, you will either need 2.0" IFP kits or 2.5" IFP kits. Whatever your reservoir size is will dictate size IFP needed.

Honda Talon X-2 QS3 Seat Shock Rebuild Bundle:

• (4) Fox 2.0" x 5/8" Shaft Seal Kit Single
• (1) Gallons of Lucas Synthetic Shock Oil in 7.5wt
• (4) 2.0" Gen 2 High Volume Nitrogen End Caps
• (1) Shaft Seal Bullet (Fox Shock 5/8" x .498" shank)

Honda Talon X-4 Seat Non-Live Valve Shock Rebuild Bundle:

• (2) Fox 2.0" x 5/8" Shaft Seal Kit Single
• (2) Fox 2.5" x 7/8" Shaft Seal Kit Single
• (1.5) Gallons of Lucas Synthetic Shock Oil in 7.5wt
• (2) 2.0" Gen 2 High Volume Nitrogen End Caps
• (2) 2.5" Gen 2 High Volume Nitrogen End Caps
• (1) Shaft Seal Bullet (Fox Shock 5/8" x .498" shank)
• (1) Shaft Seal Bullet (Fox Shock 7/8" x .498" shank)

Honda Talon R 2 Seat (Live Valve and QS3)/ Talon X-4 Seat Live Valve/ Talon X-2 Live Valve Shock

Rebuild Bundle:

• (4) Fox 2.5" x 7/8" Shaft Seal Kit Single
• (1.5) Gallons of Lucas Synthetic Shock Oil in 7.5wt
• (4) 2.5" Gen 2 High Volume Nitrogen End Caps
• (1) Shaft Seal Bullet (Fox Shock 7/8" x .498" shank)

Optional:
• (1) Uniweld 400 PSI Nitrogen Regulator Shock Fill Kit: 8ft. rubber hose, 400 PSI glycerin filled secondary gauge, bleed off valve, and whip (link)